Bygging-Uddemann has been trusted by AGN Haga AB to assist the E04 Haga project, a section of the Västlänken, with a slipform solution, including design and supervision, for a vertical shaft. Read more about the E04 Haga project here Read more about Västlänken here Project information: Assignment: Casting of shaft, 64 m deep Location: Gothenburg, Sweden...Read More
In Mo i Rana, Norway, we are currently providing equipment and expertise for repair of a gas holder. The outer telescopic walls has been lifted up 12 meters, using our T-15 strand climbers, while repair work are carried out on the inside. Project info: Location: Mo i Rana, Norway Total weight, tank: 105 tons Equpiment:...Read More
We are up and running! Our gantry slipform station in Samchuk/Samcheok has started production. The first caisson out of 49 is on the way! Read more about our systems for serial production here! Project info: Project: Samchuk TPP Caisson Project Time of execution: 2021- Scope of work: Gantry Slipform and Transfer Caisson size: 32 x...Read More
To reach net-zero emissions by 2050, the Japanese government aims to deploy 10 GW of offshore wind capacity by 2030 and 30-45 GW by 2040, including floating wind. “We strongly believe that Bygging-Uddemann’s technology and experience when it comes to serial production of concrete structures will be highly relevant for stakeholders investing in the offshore...Read More
It’s our pleasure to announce that we have been awarded the contract by Namkwang Eng. & Construction co., Ltd. for slipforming and transferring of 22 nos caissons in Ulsan, Korea. Read more about our systems, or visit Namkwang’s website for more project info. Project info: Project: Ulsan South Breakwater 2-3 Caisson Scope of Supply: Gantry slipforming and...Read More
The construction of Singapore’s mega port in Tuas – planned to be the largest container terminal in the world – has reached a new milestone! Caisson production for the third phase has just ended with the 227th caisson being completed in our gantry slipform station and transferred to the floating dock using our IP-CCV skidding...Read More
We are proud to announce that our commitments for the Tortue Hub Project, Senegal, now have been fulfilled. All cassions have been successfully slipformed with our heavy duty slipform system, and launched to the floating dock using our IP-CCV-skidding system. We thank Eiffage Génie Civil & BP for a good collaboration and wish them good luck...Read More
For Bygging-Uddemann’s Gantry Slipform and IP-CCV Transfer system, caisson production site layout can be adjusted as per project specifications. For Laayoune project, there are two stations after the gantry step which allows our client to perform additional works in two steps before load-out to floating dock. This picture was taken just upon completion of 2nd...Read More
When we executed the pylons of Humber Bridge, it was a milestone for the slipform technique and a world record for the longest single span suspension bridge. Learn more about the project here!Read More
We are proud of the success at the DL E&C Constructions site in Pohang, Korea and the first successful transfer operation of caisson type D, 16364 ton, to the Floating Dock – first to go for the “Ulleungdo Airport Caisson Project”! Project: Ulleungdo Airport Caisson Project, Korea Scope: Transfer of Caissons Quantity: 30 nos. Weight:...Read More
